Marine Hardware,Anchor Kit,Precision Casting Stamping Part Co., Ltd. , http://www.nscnc-machining.com
                                    Kiet Rail Based Shiplifting Equipment
 KIET Fluid Bed Rail Based Ship Launch System  is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects. The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 150 tons.
Parameter:
Hydraulic system configuration
Nominal Lifting Capacity
150t
Working Pressure
25MPa
Hydraulic Lifting Power
2.2Kw
Lifting Cylinder(Double Acting Mechanical Lock Nut Cylinder )
150T,Stroke:Â 250mm
Compensation Valve
70MPa Ultra High  Compensation Valve
Power
380V,50HZ,Three Phase
Current
4.85A
Walking system configuration
Wheel Base
1300mm
Track Gauge
1000mm
Walk Gear Quantity
4Â units
Walk Gear Pressure
38Â t
Walk Gear Diameter
800mm
Driving Torque(Maximum)
30000N.m
Walking Speed At Heavy Load Condition
3m/min
Walking Speed At No - Load Condition
6m/min
Traveling Driver Motor PowerÂ
7.5Kw
Vehicle Dimensions
2700x1300x1050~1300
Orbit Model
QU100/P50
Motor + Reducer
Triple Reduction
Vehicle's Self Weight
Around 5t
Berth Bogie's Maximum Walking Distance at every turn
Made By the Orbit
PowerÂ
380V,50HZ,Three Phase
Current
14.9A
Cable Trailer configuration
Cable Capacity
According to the requirement
Track Gauge
1000
Wheel Base
1900
Walk Gear Quantity
4
Wheel Pressure
18t/unit
Wheel Diameter
500mm
Power
3Kw
Self Weight(cable included)(t)
~6.8A
Maximum Output Current of Collector(A)
120A
Orbit Model
P43/P50
Maximum Height
<1.2m
Joint Current
150A
Main Power Supply
380V,50HZ,Three Phase
1. Lifting system
 with a set of ultrahigh pressure doublestage pump, it can achieve the fast lifting at noload condition and slow lifting at heavy load condition for improving the working efficiency, the compensation valve equipped on the cylinder guarantees the safe and stable decline. Using double acting mechanical lock nut cylinder can save operating time.Â
Â
2. Walking system
Structured with motor and reducer, the delivery speed is 3m/min. Low noise and high efficiency.
Â
3. Electronic control system
Â
Parallel connection power supply and control mode can not only guarantee the single hydraulic vehicle's operation, but also the numerous hydraulic vehicles' synchronous lifting and shuttle. The centralized control cable trailer can control the hydraulic small vehicles concurrently. Long distance power supply to the system can be achieved via the cable drum on the cable trailer for flexible use and wider application scope.
Packaging & Shipping:
Â
We provide wooden packing for each hdyraulic product, which can perfectly protect , the shipping can be by express parcel, by air or by sea shipping.
Our Services
    KIET provide one year guarantee for all the hydraulic products. We promise if there is any dysfunction of the hydraulic cylinder during the quality warranty not by outside force, we will replace a new cylinder for free. Any quality defects reported by customers will be responded within 24 hours.
Company Information
Jiangsu Canete Machinery Manufacturing Co.,Ltd. is a manufacturer engaged in design and manufacturing hydraulic cylinders (capacity covers from 10- 1000 tons), synchronous PLC hydraulic system, hydraulic pumps, hydraulic torque wrenches, and electric torque wrenches, and hydraulic components.
     We successfully transformed from OEM manufacturer for Enerpac, Titan, to create our own brand KIET, and our factory has been approved by CE, ISO9001:2008 consecutively.
    Our customers includes many big Chinese industrial companies:China Petroleum, Baosteel, Sinopec, China State Grid, Jiangnan Shipyards, Sany Group, China Railway Construction Corporation.
     Our synchronous PLC hydraulic system had played a great role in the China high-speed railway constructions. In 2011, our sales revenue reached 30 million USD, making us one of the leaders in the Chinese hydraulic cylinders market especially in the extra-high hydraulic cylinders for industrial area and construction field.
Â
         We are a manufacturer in tools, such as:
Hydraulic cylinders, jacks (5-1000ton), single acting and double acting, hollow plunger;
Hydraulic/ electric /pneumatic torque wrench (100-72000Nm);
Hydraulic bolt tensioner (100-11486NM); Hydraulic pullers (5-100 ton)
Hydraulic pumps, manual and electric type (max up to 3000bar);
Integrated hydraulic lifting system solutions ( 4-72 points lifting system for house translation or leveling, bridge supporting and tank welding supporting)
Hydraulic nut and Couplings. (M50-Tr1000)
Our products have been widely used in industrial field such as steel plant, cement industry, chemical and refinery, bridge, railway construction and maintenance.
Contact Information:
Contact Person: Handy Han
Mobile: +86Â Â 1800-5263-911
Office:Â Â +86-523-81569666Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Fax:Â Â 86-523-86186999/86183388
                              Website:www.kaientehydraulic.com Â
Â
Â
                                    Kiet Rail Based Shiplifting Equipment
 KIET Fluid Bed Rail Based Ship Launch System  is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects. The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 150 tons.
Parameter:
Hydraulic system configuration
Nominal Lifting Capacity
150t
Working Pressure
25MPa
Hydraulic Lifting Power
2.2Kw
Lifting Cylinder(Double Acting Mechanical Lock Nut Cylinder )
150T,Stroke:Â 250mm
Compensation Valve
70MPa Ultra High  Compensation Valve
Power
380V,50HZ,Three Phase
Current
4.85A
Walking system configuration
Wheel Base
1300mm
Track Gauge
1000mm
Walk Gear Quantity
4Â units
Walk Gear Pressure
38Â t
Walk Gear Diameter
800mm
Driving Torque(Maximum)
30000N.m
Walking Speed At Heavy Load Condition
3m/min
Walking Speed At No - Load Condition
6m/min
Traveling Driver Motor PowerÂ
7.5Kw
Vehicle Dimensions
2700x1300x1050~1300
Orbit Model
QU100/P50
Motor + Reducer
Triple Reduction
Vehicle's Self Weight
Around 5t
Berth Bogie's Maximum Walking Distance at every turn
Made By the Orbit
PowerÂ
380V,50HZ,Three Phase
Current
14.9A
Cable Trailer configuration
Cable Capacity
According to the requirement
Track Gauge
1000
Wheel Base
1900
Walk Gear Quantity
4
Wheel Pressure
18t/unit
Wheel Diameter
500mm
Power
3Kw
Self Weight(cable included)(t)
~6.8A
Maximum Output Current of Collector(A)
120A
Orbit Model
P43/P50
Maximum Height
<1.2m
Joint Current
150A
Main Power Supply
380V,50HZ,Three Phase
1. Lifting system
 with a set of ultrahigh pressure doublestage pump, it can achieve the fast lifting at noload condition and slow lifting at heavy load condition for improving the working efficiency, the compensation valve equipped on the cylinder guarantees the safe and stable decline. Using double acting mechanical lock nut cylinder can save operating time.Â
Â
2. Walking system
Structured with motor and reducer, the delivery speed is 3m/min. Low noise and high efficiency.
Â
3. Electronic control system
Â
Parallel connection power supply and control mode can not only guarantee the single hydraulic vehicle's operation, but also the numerous hydraulic vehicles' synchronous lifting and shuttle. The centralized control cable trailer can control the hydraulic small vehicles concurrently. Long distance power supply to the system can be achieved via the cable drum on the cable trailer for flexible use and wider application scope.
Packaging & Shipping:
Â
We provide wooden packing for each hdyraulic product, which can perfectly protect , the shipping can be by express parcel, by air or by sea shipping.
Our Services
    KIET provide one year guarantee for all the hydraulic products. We promise if there is any dysfunction of the hydraulic cylinder during the quality warranty not by outside force, we will replace a new cylinder for free. Any quality defects reported by customers will be responded within 24 hours.
Company Information
Jiangsu Canete Machinery Manufacturing Co.,Ltd. is a manufacturer engaged in design and manufacturing hydraulic cylinders (capacity covers from 10- 1000 tons), synchronous PLC hydraulic system, hydraulic pumps, hydraulic torque wrenches, and electric torque wrenches, and hydraulic components.
     We successfully transformed from OEM manufacturer for Enerpac, Titan, to create our own brand KIET, and our factory has been approved by CE, ISO9001:2008 consecutively.
    Our customers includes many big Chinese industrial companies:China Petroleum, Baosteel, Sinopec, China State Grid, Jiangnan Shipyards, Sany Group, China Railway Construction Corporation.
     Our synchronous PLC hydraulic system had played a great role in the China high-speed railway constructions. In 2011, our sales revenue reached 30 million USD, making us one of the leaders in the Chinese hydraulic cylinders market especially in the extra-high hydraulic cylinders for industrial area and construction field.
Â
         We are a manufacturer in tools, such as:
Hydraulic cylinders, jacks (5-1000ton), single acting and double acting, hollow plunger;
Hydraulic/ electric /pneumatic torque wrench (100-72000Nm);
Hydraulic bolt tensioner (100-11486NM); Hydraulic pullers (5-100 ton)
Hydraulic pumps, manual and electric type (max up to 3000bar);
Integrated hydraulic lifting system solutions ( 4-72 points lifting system for house translation or leveling, bridge supporting and tank welding supporting)
Hydraulic nut and couplings. (M50-Tr1000)
Our products have been widely used in industrial field such as steel plant, cement industry, chemical and refinery, bridge, railway construction and maintenance.
Contact Information:
Contact Person: Handy Han
Mobile: +86Â Â 1800-5263-911
Office:Â Â +86-523-81569666Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Fax:Â Â 86-523-86186999/86183388
                              Website:www.kaientehydraulic.com Â
Â
Kiet Rail Based Shiplifting Equipment
Model NO.: KET Series
Color: Customerized
OEM: Yes
Market: Global
Current: 4.85A
Trademark: Kiet, Enerpac, Hytorc, Titan, Powerteam
Transport Package: Wooden Package or Customised
Origin: Jiangsu, China
Model NO.: KET Series
Color: Customerized
OEM: Yes
Market: Global
Current: 4.85A
Trademark: Kiet, Enerpac, Hytorc, Titan, Powerteam
Transport Package: Wooden Package or Customised
Origin: Jiangsu, China
Â