Chromium Carbide Overlay Plate Compound Plates Wear Resistant Plates

October 30, 2018

Model NO.: 1500x3000 / 1200x2400
Hardness: Around Hv600
Cutting: Plasma/Laser Cutting/Water Jet Knife
Cold Forming: Min. Radius 150mm(6+4)
Trademark: HYSTER, OEM, DUAPLATE, DOMITE
Transport Package: Polywood Crates, Pallets, Oil Film
Specification: High Grade
Origin: China Hunan
HS Code: 7225990
Model NO.: 1500x3000 / 1200x2400
Hardness: Around Hv600
Cutting: Plasma/Laser Cutting/Water Jet Knife
Cold Forming: Min. Radius 150mm(6+4)
Trademark: HYSTER, OEM, DUAPLATE, DOMITE
Transport Package: Polywood Crates, Pallets, Oil Film
Specification: High Grade
Origin: China Hunan
HS Code: 7225990
Chromium Carbide Overlay Plate 

Description
The refined microstructure within the Hyper wear plate overlay is based on a "micro-carbide" system, which combines the improved wear resistance and impact resistance of the martensitic and chromium carbide deposits into the one plate.

Hyster wear plate is bolted or welded into equipment high wear areas to enhance wear resistance. Hyster can also custom fabricate Hyster wear plate to suit your requirements.

Micro-Structure: Mixture of hgh volume hexgonal shaped chromium carbide in tough austenitic &Martensitic

Penetration to the base metal:1.5mm

Cold forming: Minimum Radius:150mm (for 6+4) Suggested:using hydrolic press to bend plate

Cutting: Plasma (From backing plate side)/ Laser Cutting/ Water Jet Knife

I) Hardness: HRC> =58(HB> =600)

II) Chemistry: 3.5 to 6.5% C
15 to 35% Cr
1.0 to 2.5% Mn
0.7 to 2.0% Si

III) Microstructure: Refined austenitic chromium carbide alloy containing 30-50% carbides.

*We can accept OEM&ODM orders. Other thickness, please contact us for more information.

Standard  Overlays		 Weight
sq/m(kg)		 Standard Sheet Size(mm) Overall Thickness
4 ON 4 62 1500x3000 / 1200x2400 8
4 ON 6 77 1500x3000 / 1200x2400 10
6 ON 6 92 1500x3000 / 1200x2400 12
5 ON 8 100 1500x3000 / 1200x2400 13
6 ON 8 108 1500x3000 / 1200x2400 14
5 ON 10 116 1500x3000 / 1200x2400 15
9 ON 10 146 1500x3000 / 1200x2400 19
10 ON 10 157 1500x3000 / 1200x2400 20
12 ON 12 162 1500x3000 / 1200x2400 24
17 ON 12 222 1500x3000 / 1200x2400 29

Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.
 
Features and Benefits
Reduced Maintenance
• Protects any high wear area, eliminating the need for frequent rebuild or replacing wear plate
• Lasts longer than other wear protection
• Excellent alternative to hard facing which can lead to cracking of major structural components Increased Productivity
• Reduced maintenance ensures maximum machine availability
• Wide variety of shapes and sizes allows small areas to be protected, minimizing the affect on penetration and material flow
Lower Operating Cost
• Can be fit to flat or curved surfaces, eliminating the need to have wear plate formed to fit
• Bucket life is significantly increased, minimizing repair and new bucket orders
 
Typical Data Numbers:
  >white iron wear blocks life is 50% greater than that of Ni Hard Irons.
  >At least 7 times longer than A.R. type steels 360/400 BHN
  >5 times the wear rate of Manganese Steel
  >3 times the wear rate of Tapco Weld Hardfacing
  >4 times the wear rate of Astralloy-Vulcan
  >16 times the wear rate of Carbon Steel
  >3 times the wear rate of 500 BHN A.R. Plate
 
Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.

Following are our laminated wear blocks:
Types---the most common ones are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Elbow wear blocks
  10) Other sizes and shapes
  11) Multi-function gradient cutter tooth
  12) Rockbox liners
  13) Micro-ledges Chromium Carbide Overlay Plate 

Description
The refined microstructure within the Hyper wear plate overlay is based on a "micro-carbide" system, which combines the improved wear resistance and impact resistance of the martensitic and chromium carbide deposits into the one plate.

Hyster wear plate is bolted or welded into equipment high wear areas to enhance wear resistance. Hyster can also custom fabricate Hyster wear plate to suit your requirements.

Micro-Structure: Mixture of hgh volume hexgonal shaped chromium carbide in tough austenitic &Martensitic

Penetration to the base metal:1.5mm

Cold forming: Minimum Radius:150mm (for 6+4) Suggested:using hydrolic press to bend plate

Cutting: Plasma (From backing plate side)/ Laser Cutting/ Water Jet Knife

I) Hardness: HRC> =58(HB> =600)

II) Chemistry: 3.5 to 6.5% C
15 to 35% Cr
1.0 to 2.5% Mn
0.7 to 2.0% Si

III) Microstructure: Refined austenitic chromium carbide alloy containing 30-50% carbides.

*We can accept OEM&ODM orders. Other thickness, please contact us for more information.

Standard  Overlays		 Weight
sq/m(kg)		 Standard Sheet Size(mm) Overall Thickness
4 ON 4 62 1500x3000 / 1200x2400 8
4 ON 6 77 1500x3000 / 1200x2400 10
6 ON 6 92 1500x3000 / 1200x2400 12
5 ON 8 100 1500x3000 / 1200x2400 13
6 ON 8 108 1500x3000 / 1200x2400 14
5 ON 10 116 1500x3000 / 1200x2400 15
9 ON 10 146 1500x3000 / 1200x2400 19
10 ON 10 157 1500x3000 / 1200x2400 20
12 ON 12 162 1500x3000 / 1200x2400 24
17 ON 12 222 1500x3000 / 1200x2400 29

Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.
 
Features and Benefits
Reduced Maintenance
• Protects any high wear area, eliminating the need for frequent rebuild or replacing wear plate
• Lasts longer than other wear protection
• Excellent alternative to hard facing which can lead to cracking of major structural components Increased Productivity
• Reduced maintenance ensures maximum machine availability
• Wide variety of shapes and sizes allows small areas to be protected, minimizing the affect on penetration and material flow
Lower Operating Cost
• Can be fit to flat or curved surfaces, eliminating the need to have wear plate formed to fit
• Bucket life is significantly increased, minimizing repair and new bucket orders
 
Typical Data Numbers:
  >white iron wear blocks life is 50% greater than that of Ni Hard Irons.
  >At least 7 times longer than A.R. type steels 360/400 BHN
  >5 times the wear rate of Manganese Steel
  >3 times the wear rate of Tapco Weld Hardfacing
  >4 times the wear rate of Astralloy-Vulcan
  >16 times the wear rate of Carbon Steel
  >3 times the wear rate of 500 BHN A.R. Plate
 
Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.

Following are our laminated wear blocks:
Types---the most common ones are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Elbow wear blocks
  10) Other sizes and shapes
  11) Multi-function gradient cutter tooth
  12) Rockbox liners
  13) Micro-ledges

Main Performance(Backhoe and Front Loader)
1.Used in shoveling ,stacking or short-distance transportation of loose material like mud,sand stone or garbage
2.Hydraulic transmission is used,featured with compact structure,flexibility ,convenient operation and quick mounting and dismounting.It uses hydraulic oil commonly with Tractor .The hydraulic elements are standardized ,convenient for operation and service.

3.Different work devices are optional,such as combine buckets,grating cover bucket,pallet handler,timber grab and bale fork,etc,so as to accomplish different kinds of work successfully.


Loader

Wheel Loader ,Backhoe Loader,Skid Steer Loader,Tractor Loader

ZH MACHINERY , http://www.sczhmachinery.com