Industrial
Laser Distance Sensor, we also call it secondary development laser distance
module, which support TTL level and CMOS. The laser Range Sensor can be widely
used in professional surveying, mapping, construction, robots, hunting arrows,
industrial monitoring and automated measurement applications in electricity,
transportation, etc. Our Laser Distance Module supports data communication with
RS232, USB with a simple adapter. The results of laser Distance Sensor can be
evaluated with Arduino. We are always looking ahead, hoping we can make every
measurement simple in life!
Parameters
of M703A:
Accuracy
±1
mm (0.04 inch)
Measuring
Unit
meter/inch/feet
Measuring
Range (without Reflection)
0.03-150m
Measuring
Time
0.1~3
seconds
Laser
Class
Class
II
Laser
Type
635nm,
<1mW
Size
72*40*18mm
(±1 mm)
Weight
About
21g
Voltage
DC2.0~3.3V
Electrical
Level
TTL/CMOS
Frequency
10Hz
Operating
Temperature
0-40 ℃ (32-104 ℉ )
Storage
Temperature
-25~60 ℃ (-13~140 ℉)
Industrial Laser Distance Sensor Laser Distance RS232,Arduino Distance Module,Laser Module RS232 Chengdu JRT Meter Technology Co., Ltd , http://www.jrt-measure.com
Performance Range
Capacity Q: 20-200GPM
Head H: 21 ~ 217m
Instruction of jockey pump model
For example 65DL16X5
65_ Inlet diameter (mm).
DL_ Vertical multi - stage segmental centrifugal pump.
DLR _ Vertical multi-stage segmental hot water centrifugal pump.
16_ Single-stage head (m).
5 _ The number of stages. The total head is 16x5=80m.
Structure
The DL/XBD series jockey pump is vertically mounted. The inlet located at upper side of the pump, the outlet located at underside, both are at horizontal direction. Be able to increase the number of the stages according to the head. Depend on installing condition the outlet can rotate 90, 180 and 270 degrees to adjust the direction of outlet. The axial forces of pump are balanced by balancing drum. The pump has the features of compact structure, low noise and space-saving. The shaft seal can be either packing seal or mechanical seal.
The materials of medium-contacting parts
Suction casing, stage casing, discharge casing, vane, impeller are made of cast iron, .
The material of shaft is high--quality carbon steel.
If the customers have special requirement for materials, consult with manufacturer.
DL/XBD series jockey pump are single-suction multi-stage vertical segmental centrifugal pump. DL/XBD jockey pump is widely used for water boosting in fire fighting system. It is provided for transferring clear water or other liquid with physically and chemically similar to clear water. The temperature of the liquid generally is below 80 deg C. Type DLR pump is used to transfer the liquid below 120 deg C.
Performance Range
Capacity Q: 20-200GPM
Head H: 21 ~ 217m
Instruction of jockey pump model
For example 65DL16X5
65_ Inlet diameter (mm).
DL_ Vertical multi - stage segmental centrifugal pump.
DLR _ Vertical multi-stage segmental hot water centrifugal pump.
16_ Single-stage head (m).
5 _ The number of stages. The total head is 16x5=80m.
Structure
The DL/XBD series jockey pump is vertically mounted. The inlet located at upper side of the pump, the outlet located at underside, both are at horizontal direction. Be able to increase the number of the stages according to the head. Depend on installing condition the outlet can rotate 90, 180 and 270 degrees to adjust the direction of outlet. The axial forces of pump are balanced by balancing drum. The pump has the features of compact structure, low noise and space-saving. The shaft seal can be either packing seal or mechanical seal.
The materials of medium-contacting parts
Suction casing, stage casing, discharge casing, vane, impeller are made of cast iron, .
The material of shaft is high--quality carbon steel.
If the customers have special requirement for materials, consult with manufacturer.
Fire Pump/Jockey Pump (Vertical Multistage centrifugal pump)
Model NO.: DL/XBD
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Verticaljoint Surface Pump
Impeller: Closed
Usage: Industry Field
Trademark: M & W PUMP
Transport Package: Exported wooden box
Specification: DL/DLR
Origin: China
HS Code: 8413709990
Model NO.: DL/XBD
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Verticaljoint Surface Pump
Impeller: Closed
Usage: Industry Field
Trademark: M & W PUMP
Transport Package: Exported wooden box
Specification: DL/DLR
Origin: China
HS Code: 8413709990
DL/XBD series jockey pump are single-suction multi-stage vertical segmental centrifugal pump. DL/XBD jockey pump is widely used for water boosting in fire fighting system. It is provided for transferring clear water or other liquid with physically and chemically similar to clear water. The temperature of the liquid generally is below 80 deg C. Type DLR pump is used to transfer the liquid below 120 deg C.