New Design Medium Frequency Induction Forging Machine with Great Price

Application:
Quenching: Quenching for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear(orchard shear).
Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, drive shaft, small shaft and fork.

Various electric tools: Gears and axes.
Quench for machine tool: Lathe deck and guide rail.
Quench for various hardware metal parts and machined parts, such as shaft, gear(chain wheel), cam, chuck and clamp etc.
Quench for hardware molds, such as small size mold, mold accessory and inner hole of mold.

Main characteristics:
1. IGBT inversion technology based LC series circuit .
2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically.
3. diode rectifier cause high power factor more than 0.95
4. working continuously with 100% duty cycle, power can be instantly turned on or shut off.
5. perfect protective circuit and cooling system design, which ensure the good reliability of machine.
6. low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy saving 15%-30% compared with SCR induction heating machine.
7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating smoke, waste heat, noxious emissions and loud noise.
8. operating and installation easily and safely
9. can substitute traditional heating methods.

Main characteristics:
>MOSFET power component and current inverting technologies have been used.
>simple structure and light weight.
> simple to operate, a few minutes is enough to learn it.
> simple to install, installation can be donne by unprofesstional person very easily.
> mul-tidisplay functions, with displays of over current, over voltage, water failure, phase failure and unfit 
lad and so on, machine can be protected from destroys and machines can be repaired easily.
> light weight, small size.
> different shape and size of induction coil can be changed easily to heat different parts.
> advantages of the model with timer: the power and the operating time of the heating period and retain 
period can be preset respectively, to realize a simple heating curve, this model is suggested to use for 
batch production to improve the repeatability.
> the separated models are designed to fit the dirty surroundings, the generator can be put in a clean 
space to increase the reliability; with the small size and light weight of the separated transformer, it is 
conveient to use in the production line and easily assembled inside the machinery or moved mechanism. 

Main Application:
Rod forging
bolt, nut forging
heat treatment of shaft, gear, pin, etc.
shrink-fitting
annealing of pipe welding
etc.

Company Information
YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD
YUELON is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems.
 Our company was established in 1998 and is privately held.
Precision induction heating solutions are our specialty. Use induction heating to improve the efficiency and effectiveness for industrial heating process.
 that are used for application such as brazing, annealing, quenching, forging, melting, shrink fitting etc.
our induction heating machine are Available from 2KW to 1500KW deliverable output power with 0.5KHZ to 1.1MHZ operating frequency range.
company philosophy:
By the technical service customers, create benefits for customers
All our products are divided into four major series according to the frequency:

Medium frequency series (abbr. MF series): 0.2-20KHZ
High frequency series (abbr. HF series): 30-100KHZ
Superaudio frequency series (abbr. SF series): 8-40KHZ
Ultrahigh frequency series (abbr. UF series) : 100-1000KH





Application


Our customers





Packaging & Transportation



Certificate




Our Services
We offer complete service : 
Before sales
Our professional technical recommend the right machine and can also customize special machine as customer's requirement and special parts.
 
Sales following
During machine production, watching the machine quality and testing machine and take pictures or make video for customer checking.
 
After Sales
Machine have one year quality warranty one year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.


FAQ
1. Why choose YUELON?
QUALITY IS OUR CULETURE. YUELON put this ideal into every lines and circuit.
YUELON is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems. Our company was established in 1998 and is privately held. Yongkang Yuelon Electronic Equipment Co., Ltd. is specialized in researching and manufacturing solid-state medium to ultrahigh frequency induction heating equipment .
2. How many years it can work?
Machine life 10-15 years, when the water temperature can meet the needs of equipment life will be longer.
3. How many days we got the machine?
Usually within 10-15 days after receiving your 100% payment.
4. MOQ,mode of payment
1set,   L/C,T/T  
5.Where's the company address?
The company is located in Yongkang city, Jinhua city, Zhejiang province, near Hangzhou, Yiwu
6 If there is some trouble with the machine ?
If there is any problem (free to send parts within one year), you can send us via photo or video , we can mail accessories or video guidance to you, so you can timely repair the machine.
7. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.
8.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
9.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
10. Which export port you use?
Any China port, commonly we will use Shanghai, Ningbo port, it can appoint as you like.
11.How about the payment terms and delivery time ?
 You can pay by T/T,L/C or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.
12.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.
13.Is your goods has ISO9001 or CE certificate ?
Yes, all our goods has CE certificate. All machines are high quality goods.
14.What is your nature of your company: dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us. 


Welcome to our company
Welcome to visit our factory at Yongkang city, Zhejiang province, China.
Very near hangzhou and shanghai city.
Just need 1 or 2 hours by high speed train.

Application:
Quenching: Quenching for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear(orchard shear).
Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, drive shaft, small shaft and fork.

Various electric tools: Gears and axes.
Quench for machine tool: Lathe deck and guide rail.
Quench for various hardware metal parts and machined parts, such as shaft, gear(chain wheel), cam, chuck and clamp etc.
Quench for hardware molds, such as small size mold, mold accessory and inner hole of mold.

Main characteristics:
1. IGBT inversion technology based LC series circuit .
2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency tracking automatically.
3. diode rectifier cause high power factor more than 0.95
4. working continuously with 100% duty cycle, power can be instantly turned on or shut off.
5. perfect protective circuit and cooling system design, which ensure the good reliability of machine.
6. low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy saving 15%-30% compared with SCR induction heating machine.
7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees by eliminating smoke, waste heat, noxious emissions and loud noise.
8. operating and installation easily and safely
9. can substitute traditional heating methods.

Main characteristics:
>MOSFET power component and current inverting technologies have been used.
>simple structure and light weight.
> simple to operate, a few minutes is enough to learn it.
> simple to install, installation can be donne by unprofesstional person very easily.
> mul-tidisplay functions, with displays of over current, over voltage, water failure, phase failure and unfit 
lad and so on, machine can be protected from destroys and machines can be repaired easily.
> light weight, small size.
> different shape and size of induction coil can be changed easily to heat different parts.
> advantages of the model with timer: the power and the operating time of the heating period and retain 
period can be preset respectively, to realize a simple heating curve, this model is suggested to use for 
batch production to improve the repeatability.
> the separated models are designed to fit the dirty surroundings, the generator can be put in a clean 
space to increase the reliability; with the small size and light weight of the separated transformer, it is 
conveient to use in the production line and easily assembled inside the machinery or moved mechanism. 

Main Application:
Rod forging
bolt, nut forging
heat treatment of shaft, gear, pin, etc.
shrink-fitting
annealing of pipe welding
etc.

Company Information
YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD
YUELON is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems.
 Our company was established in 1998 and is privately held.
Precision induction heating solutions are our specialty. Use induction heating to improve the efficiency and effectiveness for industrial heating process.
 that are used for application such as brazing, annealing, quenching, forging, melting, shrink fitting etc.
our induction heating machine are Available from 2KW to 1500KW deliverable output power with 0.5KHZ to 1.1MHZ operating frequency range.
company philosophy:
By the technical service customers, create benefits for customers
All our products are divided into four major series according to the frequency:

Medium frequency series (abbr. MF series): 0.2-20KHZ
High frequency series (abbr. HF series): 30-100KHZ
Superaudio frequency series (abbr. SF series): 8-40KHZ
Ultrahigh frequency series (abbr. UF series) : 100-1000KH





Application


Our customers





Packaging & Transportation



Certificate




Our Services
We offer complete service : 
Before sales
Our professional technical recommend the right machine and can also customize special machine as customer's requirement and special parts.
 
Sales following
During machine production, watching the machine quality and testing machine and take pictures or make video for customer checking.
 
After Sales
Machine have one year quality warranty one year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine.


FAQ
1. Why choose YUELON?
QUALITY IS OUR CULETURE. YUELON put this ideal into every lines and circuit.
YUELON is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems. Our company was established in 1998 and is privately held. Yongkang Yuelon Electronic Equipment Co., Ltd. is specialized in researching and manufacturing solid-state medium to ultrahigh frequency induction heating equipment .
2. How many years it can work?
Machine life 10-15 years, when the water temperature can meet the needs of equipment life will be longer.
3. How many days we got the machine?
Usually within 10-15 days after receiving your 100% payment.
4. MOQ,mode of payment
1set,   L/C,T/T  
5.Where's the company address?
The company is located in Yongkang city, Jinhua city, Zhejiang province, near Hangzhou, Yiwu
6 If there is some trouble with the machine ?
If there is any problem (free to send parts within one year), you can send us via photo or video , we can mail accessories or video guidance to you, so you can timely repair the machine.
7. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.
8.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
9.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
10. Which export port you use?
Any China port, commonly we will use Shanghai, Ningbo port, it can appoint as you like.
11.How about the payment terms and delivery time ?
 You can pay by T/T,L/C or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.
12.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.
13.Is your goods has ISO9001 or CE certificate ?
Yes, all our goods has CE certificate. All machines are high quality goods.
14.What is your nature of your company: dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us. 


Welcome to our company
Welcome to visit our factory at Yongkang city, Zhejiang province, China.
Very near hangzhou and shanghai city.
Just need 1 or 2 hours by high speed train.

Combined Bearing

Combined Bearing,Motor Needle Roller Bearing,Marine Mechanical Bearings,Machine Tool Equipment Bearing

Changzhou Fangya bearing Co.,LTD , https://www.czfybearing.com